Tuesday, February 28, 2017

3D Printed Soviet/Russian Vehicles from Bashytubits

All,

I have been on a tear the last year or so, buying up 15mm stuff, from WWII to Vietnam to Moderns.  And so when fellow TMPer "Bashytubits" bought a 3D Printer and began turning out Cold War NATO and Warsaw Pact vehicles, he had my attention.  He's been advertising his wares on TMP and I liked the selection and how the initial pictures looked, so I figured I'd give it a shot.  I guess it's been a couple weeks ago now, but I placed on order with him, shuttling funds via PayPal, and a few days later I was the recipient of some 15mm plastic Cold War goodness.  I ordered more (a total of 13 vehicles), but haven't had the time to finish all of them, but I've got six vehicles completed and  I really like them and wanted to show them off.

So below you'll see six plastic vehicles from BashTubits' 3d Printer: two T-62s, two BMP-1s, and two BTR-60s.  I apologize as I now wish I'd have taken initial ("before") photos, but I apologize, you'll have to live with just the final ("after") photos.  And I beg forgiveness on another note as well: these are definitely Cold War-era vehicles, but as I intend on using them in a fictional, Imagi-Nation-style dust-up, I actually painted them up in quasi-'modern' Russian camouflage.  I've placed two Khurasan 15mm Private Military Contractors next to the vehicles for scale, in quite a few of the pics.

The whole shebang, from left: two T-62s, two BMP-1s, and two BTR-60s.  All of these vehicles are two piece, hull and turret, and when they arrive they are U-G-L-Y!!!  Coming out of the 3D Printer, they've got a lot of plastic stuff that needs to be cleaned up.  I'll admit that it was really ugly and I was really aggravated, but in the end I simply busted out my X-acto knife and it took me between 15 and 20 minutes per vehicle to clean up.  I figure that's about the same as it's taken me to do other plastic vehicles (cleaning up and assembling).  So you clean out all the excess plastic, then slap the turret on and spray prime them, no sweat.

Another look.

The T-62s.  Good stuff, right?  The 14.5mm AA MG and fuel drums come molded on; like I said, two pieces, turret and hull.

Again; you can see I did the camo on each vehicle up slightly different.

Fore and aft.

With 15mm troops to show scale.  Looks right to me.

Lower angle.

On to the BMP-1s; please recall these are the initial model with 73mm cannon, Sagger ATGM mounted atop.  When I first saw the Sagger I thought the detail was a bit soft, but once painted up it looks fine (in my humble opinion).

Opposite.

Front left/rear right quarter.

Front right/rear left quarter.  Yeah, I can never help myself but to paint optics and lights royal blue, and paint something yellow on anti-tank weapons, it's a character flaw.  I don't get it myself, I guess I just like my weapons to have a bit of flair ;)

Flank shots, with figures.  Look at the relief and detail, it's really great.

Up high.

Closer shot.

Before moving on to the BTR-60s.  I don't know what it is, but I just like the look of BTRs.

Front right/rear left quarter, with troops for scale.

Front left/rear right quarter.

Fore and aft; you can see the early BTR circular rear troop hatches at left.

Closer up on the flanks.

The whole group again.

From behind.

Opposite side.

And a couple close-ups.  I'd seen on TMP where some folks were bagging on the level of detail and the texture of 3D printed vehicles.  I'll say this: it appears the 3D Printer has a bit of a rough time with small-diameter barrels.  The BMPs 73mm cannon has not been modified in any way; you can see it's just a tad uneven.  But other than that, the level of detail is great to me, and while there are some 'striations' if you get up super close, none of it is anything I can't live with at gaming table range.

Close up of the BTR.  Again, here you can see some striations, but keep in mind these photos are larger than real life.

And lastly, a close up of the T-62.  So yeah, you can see some lines if you've got your nose pressed up against the models, but if you think it's a problem I'd kindly ask you to back to the pics at top.  I'm very happy with these vehicles, and intend on ordering more.  After I finish up the rest of this order ;)

I've had quite a few (e-mail) conversations with him, and Bashytubits is continuing to work on new models.  If you're looking, I need that Warrior with Chobham armor!!! ;)  And a Gepard, probably some M-60s...

On a side note, real life butted into my wargaming time in a serious way last weekend, and what little time I had I used to work on these.  So sorry, no games :(  But quite your whining, I'll get some in this coming weekend, and I've already posted twelve batreps in 2017!!!

V/R,
Jack

Monday, February 20, 2017

For Sale: 1/72 WWII and Vietnam

All,

BOTH SOLD!!!


More items for sale, stuff I bought a couple years ago and never got around to finishing.

First up, some WWII 1/72 plastic stuff, then Vietnam 1/72 plastic stuff below.  You can Paypal me at big jack mac -at- hot mail -dot- com , first come first serve, I'll get them in the mail straightaway.

WWII: total package is $90, which includes shipping in the US.  What's included (pics of everything down below):
1 package of Plastic Soldier Company German Panther Tanks (2 vehicles), assembled and primed Dunkelgelb
1 package of Plastic Soldier Company German Pz Mk IVH (3 vehicles), assembled and primed Dunkelgelb
1 package of Plastic Soldier Company Sdkftz 251 halftracks (3 vehicles, one with 37mm ATG), assembled and primed Dunkelgelb
1 package of Plastic Soldier Company M4 Shermans with 76mm guns (3 vehicles), assembled and primed medium green
1 package of Plastic Soldier Company M4 Shermans with 75mm guns (3 vehicles), assembled and primed medium green1 package of Plastic Soldier Company Sherman Fireflies with 1-pdr guns (3 vehicles), assembled and primed medium green
1 package of Plastic Soldier Company M5 Stuarts (3 vehicles), assembled and primed medium green
1 package of Plastic Soldier Company M5 Halftracks (3 vehicles), assembled and primed medium green
1 package of Valiant Germans, assembled, on painting strips, primed with Plastic Soldier Company German Uniform spray
1 package of Valiant Germans in Normandy, assembled, on painting strips, primed with Plastic Soldier Company German Uniform spray
1 package of Valiant British, assembled, on painting strips, primed with Plastic Soldier Company British Uniform spray
1 package of Valiant Americans, assembled, on painting strips, primed with Krylon Khaki (flat) spray
1 package of Valiant German Paratroopers, still on sprues but for three test figures
1 package of Plastic Soldier Company British Universal Carriers, still on sprues but for one test vehicle
1 package of Plastic Soldier Company German PaK-38 anti-tank guns, still on sprues

Valiant troops assembled, stuck on painting sticks, and primed.  Germans at top, Brits at bottom left, Americans at bottom right.  German FJ not shown as they are still on their sprues.

Germans.


Closeup.
British.

Closeup.

Americans.

Closeup.

A test figure for the Americans.

A bunch of sprues: Valiant German Airborne, PSC Universal ("Bren") carriers, and PSC German PaK-38 50mm ATGs.  The only closeup I don't have is of the PaK-38s, as I haven't messed with them except to take them out of the box.

One assembled Universal Carrier.

Three German FJ test figures.

The vehicles, all 1/72 Plastic Soldier Company.

The M4 Shermans with 76mm gun.

M4 Shermans with 75mm gun.

Sherman Fireflies with 17-pdr gun.

M5 Stuarts.

M5 halftracks.

German Panthers.

German Pz IVHs (with side skirts on hull and turret, long 75mm gun).

And Sdkfz 251 halftracks, with halftrack at top built as platoon commander with 37mm gun mounted.

That's all the WWII stuff (for now, at least), on the Vietnam gear.

Vietnam, total package is $23,which includes shipping in the US.  What's included (pics of everything down below):
3 packs of ESCI/Italeri 1/72 US troops, stuck on painting sticks, primed khaki, uniform shirts, trousers, and helmets brushed medium green, and four men fully painted as test figures.  I swapped heads on quite a few figures to mix them up.
2 packs of ESCI/Italieri 1/72 NVA/Viet Cong, stuck on painting sticks and primed khaki.

The entire project, with NVA/VC on top and US on the bottom.

The US troops.

Again.

Four test figures.

The NVA/VC.

Again.

Thanks for looking!

V/R,
Jack